Silicone Rubber P10 A&B

Product description :

P series silicones are two compounds, liquid, with the mixing ratio of 1:1 ,

it’s also called addition cured silicone rubber that have exceptional tear strengthandworking properties, cured in room temperature. There are a wide range of applications for P series platinum silicone rubber.

1. Industry mold making : plaster, gypsum, concrete, stones, wax, jewelry, polyurethane, polyester resin etc.

2. Food grade mold making: cake ,candy ,chocolate et

Features

 Outstanding release properties

 Amazing fluidity and easy to operate

 Platinum-based, food-grade silicone (environmental, odorless and nontoxic)

 Mixing ration: 1:1 for easy operation

 Easy de-molding

 Excellent tension and tear strength

 High performance in duplication

 No shrinkage on the cured mold

 Excellent resistance to weather, temperature, aging, acid & aging-Proofing.

 High resistance to high temperature and aging(resist -60 to 250°C)

Applications

Due to its good characters and excellent performances , P series silicone is with a wide range of applications as below:

 Industry mold making : plaster ,gypsum, concrete, stones, wax, jewelry, polyurethane ,polyester resin ,jewelry etc.

 Food grade mold making: cake ,candy ,chocolate etc.

 Life casting: human body , human mask, etc.

  Silicone products: Prosthetic limbs, silicone insoles, silicone doll, etc.

 Instructions for use:

1- Mix equal proportions of silicone and hardener A&B

2- Mix the mixture well

3- You can add colors designated for silicone from Atyab International, or mica colors.

4- Operating time is usually 30 minutes

5- The initial hardening time is 8 hours, depending on the temperature

6- Within 24 hours, the silicone will probably be ready to come out of the mold and be used

Technical information

 Silicone Rubber P10 A&B

Hardness : 8-10

Viscosity – Cps : 1500-2200

Mixing Ratio - % : 1:1

Tear Strength - KN/m2 : 15-18

Tensile Strength – Mpa : 3.5-4.5

Shrinkage - % : 0.1%

Elongation - % : 600-800%